5 Stage Undersink Reverse Osmosis System Water Filter with 12Pcs

Total is 12 filters

Plus extra 7 replacement filters for free and at least 2 years use. Total is 12 filters .

 

Lead Free Faucet

Premium ceramic disc operated, certified lead-free ro drinking water dispensing faucets. 3/8 inch input. Faucet has a mounting range of ½”- 1 ½” for installation in a sink or countertop.

Wastewater ratio is 1:2

NSF certificated Thin-film composite RO membrane filters with higher water production rate. 2 gallons wastewater will be produced for every gallon pure water.

 

Specification:  FEED WATER PRESSURE: 40 - 100 PSI TEMPERATE:40-110°F/5-45°C PH:3.0 -11.0 MAX TDS :1000 PPM TURBIDITY < 1.0 NTU MAX SDI <4.0 HARDNESS < 5 GPG IRON <0.1 MANGANSESE <0.05 Shelf life: 3 Years More valuable information: ✪What is dimension of installed Geekpure RO5? RO unit: Length 14.20 inch, Width 6.2 inch, Height 18.1inch. Storage tank: Diameter 9.45 inch, Height 14.4inch. weight: 30.21lb   ✪What is 5 stage filter and function? the 1st stage: PP sediment filter. Remove sand, dirt, sediment. the 2nd stage: Granular carbon filter. Remove chlorine, taste & odors, very fine particulates the 3rd stage: Carbon block filter. Further remove chlorine, taste & odors, very fine particulates the 4th stage: TFC Ro membrane. Reduce 99% total dissolved minerals, heavy metal, Arsenic, Mercury, Iron, lead ,Fluoride and 1000+ contaminants . the 5th stage: Post inline acid washed coconut carbon filter. Polish water for refined taste.   ✪Where can I buy replace filters? Water Filter Replacements Set-50G Water Filter Replacements Set -75G Water Filter Replacements Set-100G Replacement Filters Set-4 ro membrane-75G ✪What is in the box? 1 complete Ro water purifier and 7 pcs extra free replacement filters for at least 2 years use.   ✪BPA free? Yes, BPA free ,Lead free and food grade materials. Note:  1.It Is Recommended to Wait Until the Entire System Is Pressurized (Including Storage Tank&Faucet) and Re-Check for Any Leaks Before Leaving Installation Site. 2.It Is Normal for Some Black Carbon Fines to Appear in The Water When Emptying the First 2 Tanks of Water. The First 2 Tanks of Water Produced Should be Emptied and Not Used.  3.Push the Tubing All the Way in and Use Teflon Tape During Installation. About the water adapter, it can be changed in size (3/8" or 1/2"), just rotate one end down and install it to the other end.