2pcs Water Flow Switch G1/4" Water Control Sensor For Water Purifier

Product features 1. High sensitivity and durability. 2. Response: less than 1s. 3. Light weight, reasonable size, stable performance. 4. Low water pressure start, easy to install, safe to use. 5. Widely used: can be used in drinking fountains, water purifiers, vending machines, etc. Basic principle: when the water flows in the preset flow channel, it pushes the magnet to displace, and when it moves to the corresponding reed switch senses the magnetic field, the reed switch conducts; when there is no water flow, the magnet returns to the position under the thrust of the spring, and the corresponding reed switch senses the magnetic field, and then the reed switch is disconnected. Product Parameter Model: MW-WS-S2 Connector size: 2 points quick connect (1/4") Thread: G1/4 Starting flow: S2 type: <300ml/min Response time: <1S Switch type: normally (break) open Wire length: 50cm Segment type: XH-2 Voltage range: DC0-110V Maximum closing current: 0.5A Maximum load current: 1A Wire connection strength: 20N.10S tension applied axially along the terminal, 20N.10S tension applied vertically along the terminal (no damage to the connection) Water pressure resistance: hydrostatic pressure at 1.05MPa open for 5 minutes (no leakage and breakage) Drop performance: from the height of 50cm in any direction to the concrete once (after the test action is normal, no damage) Applicable environment Applicable water quality: turbidity <1; Fe+ Co+ Ni<0.3Mg/L Applicable water pressure: ≤0.8MPa Applicable water temperature: 5~50°C Ambient humidity: < 85 Storage temperature: -20~50℃ Delivery list Water flow sensor*2

Returns Accepted for this item if it's within 30 Days